Ulbrick Guitar Noise Reduction Systems

Over 40 years of experience as a world-class guitar technician, musician, guitar effects and custom hand made amplifier builder has made the impossible possible.

There are plenty of ways to limit this hum that are intrusive, complicated and ultimately hinder the tone of your single coil pickups

That is why this is a game changer!

It’s incredibly simple, impossibly efficient and works far better than anything else with zero loss in tone - which is why we patented the heck out of it!

Now you can enjoy your favourite guitar in any situation thanks to ULBRICK Guitar Noise Reduction in Melbourne



NRS Models

Model 1 (5.5k - 6.5k)

Perfect for Single Coil Stratocaster® and Telecaster®, Gretsch® Single coil guitars and Fender Jaguar®

Model 2 (6.5k - 7.5k)

Perfect for higher output Stratocaster®, Telecaster® pickups and Fender Jazz® basses

Model 3 P90 (7.5k - 10k)

As the model name suggests, suits Gibson P90® pickups

RWM (Reverse wound middle)

For guitars with reverse wound middle pickups

Installation instructions for other guitars



Additional fitting instructions for Telecaster

Telecaster pickups both need the black pickup wire to be disconnected from the chrome cover and metal baseplate of the bridge pickup. There is usually a small wire soldered onto the chrome cover and bridge baseplate to the black wire. A new wire will need to be now soldered to the metal baseplate of the bridge pickup. Both these new wires will be fed through the body and both soldered to the back of the volume pot. Now the NRS can be soldered to both black pickup wires (neck and bridge) to achieve noise reduction.